Description
iCharger X12 1100W/30A Mini Balance Charger / Discharger from Junsi
Features
X12 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A.
X12 Supports 12s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction.
Supports 1-32s NiMH/NiCd batteries and 1-20s Pb batteries.
With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage protection, input undercurrent protection, and etc.)
Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
This charger can save 32 parameters sets and support the data import/export to SD card.
A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
X12 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging
capacity, overrun time and maximum power etc.
Supports upgrading the hardware program by USB port or SD card. X12 also supports the “Junsi Console” softwareand can display, plot and analyze the charge and discharge data by it.
Please Note: We are getting many none modelling customers buying this charger for many uses not modelling related.
We can offer no support for any use not model related and incorrect use may effect warranty. A 12 months factory repair warranty is offered with this charger as the factory insist on seeing all chargers that have an issue.
Specification:
Dimension: 112×64×37 ±0.5mm
Net weight: 230g
Device display: 2.4 "IPS LCD (320×240)
Input voltage range: 11—53VDC
Max. input power current: ﹤35A
Max. charge/discharge/DC power current: 30A
Max. output voltage/current for digital power supply 50V/30A
Maximum charge power capacity: 1100W
Maximum discharge power capacity: 50W/1100W (regenerative)
Max. balancing current/cells: ﹥2A/12S
Maximum extended discharge power: 1500W @50V/30A