Rcexl Large Scale Safety Kill Switch (Magneto) 2211
- Works on any gasoline engine land or sea with a magneto drive ignition (not compatible with CDI driven ignition systems).
- Remote LED to indicate if the ignition is live
- Fibre optically coupled to eliminate interference.
- Li-Po/Li-Ion/LiFe/Ni-Cd/Ni-MH compatible.
- Input range from 3V, 3 amps up to 20V, 16 amps.
- Surface mount technology.
- High-quality wiring with universal servo connectors.
- Only 0.3 oz/8 g.
- Manually shut off engine from assigned button on transmitter
- Automatically shuts down power to the ignition on loss of signal or low voltage.
Installation:
- 1. Connect Safety Kill Switch into AUX1 or an open channel.
-
-
- 2. Install the kill switch in a convenient, secure and protected location. The receiver or receiver battery box is ideal.
- 3. Mount LED in a visible location.
- 4. Secure the Safety Kill Switch in position with foam tape in order to prevent vibration damage.
- 5. Connect the Safety Kill Switch cable to the ignition coil terminals. Polarity doesn’t matter.
- 6. Zip tie ignition cable away from the flywheel and any moving parts.