iCharger 308 DUO 1300W Balance Charger from Junsi iCharger Junsi Replaced by 458 Duo
The extremely powerful iCharger 308 DUO is the little of brother to the 4010 DUO. It still delivers an impressive 1300W (@23.5V) in synchronous mode! It’s effectively two 8S chargers in one. When used in dual mode, capable of supplying 50A continuously.
2 x Balance Board CB1010-XH (JST) and connecting harnesses are included with this charger.
Input Voltage Range |
10-30V |
Input Current Limit |
<65A, Chanel Limit <40A |
Maximum Charge Power Capacitiy |
1300W (Channel 800W @Input > 23.5V) |
Charge Current Range |
50A Syn. Mode – 30A Asyn. Mode |
Discharge Power Capacity |
70W per channel or 120W in dual mode |
Max Regenerative Discharge Power Capacity |
800W per channel or 1300W in dual mode |
Max Extra Discharge Power Capacity |
1050W @ 35V/30A or 2100W in dual mode |
Current Drain for Balancing |
1.2A per channel or 2.4A in dual mode |
Balance Accuracy |
<10mV |
Lithium (LiPo/LiIo/LiFe) Battery Cell Count |
1-8 Series |
NiCad/NiMh Battery Cell Count |
? |
Pb Battery Cell Count |
? |
Log Files Storage |
? |
Battery Setup Memories |
? |
Intelligent Temperature Control |
Yes |
PC Connect |
USB Port |
Weight |
910g |
Dimensions (L x W x D) |
171.2 x 117.8 x 58.8mm |
All Junsi chargers of the X and DUO series are developed and approved for use in model making.
Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making!
No AGM batteries may be charged in the PB range.
Please Note: We are getting many non-modelling customers buying this charger for many uses not modelling related.
We can offer no support for any use not model related and incorrect use may effect warranty. A 12 months factory repair warranty is offered with this charger as the factory insist on seeing all chargers that have an issue
Software Updates
New Download Manager Link
http://www.hillrc.com/Endownload.asp
Version V2.17 Now available as of 19/01/2015
Please note - Software updates must be performed using the optional iCharger USB cable designed exclusively for iChargers. Using other USB cables may result in damage to the iCharger.
Find the Manual here.
http://www.hillrc.com/UploadFiles/308DUO_Manual_en.pdf